TAPPING SCREW (C 1018)
Ind. Hex Flange Washer Head
Sharp point at the tip,
case hardened
Mechanical Galvanized with EDPM bonded steel washer.
| T.P.I | LENGTH (Inch) | REMARKS |
| # 14 – 10 | 2 ½” | # 14 – 6.3 mm Major Diameter |
| # 14 – 10 | 2” | |
| # 14 – 10 | 1” | |
| # 12 – 10 | 2” | # 12 – 5.6 mm Major Diameter |
| # 10 – 12 | ¾” | # 10 – 4.8 mm Major Diameter |
| # 10 – 10 | 2” |
EDPM Bonded Steel Washer
O.D: – 11, 12, 14, 16 and 18 mm
I.D: – 4.8, 5.5, 9, 10, 11, 12 and 14 mm
Thickness: – 2, 2.7 and 3 mm
SELF DRILLING SCREW (C 1022)
Hex washer head
case hardened
mechanical galvanized with EDPM bonded Steel Washer
| T.P.I | LENGTH (Inch) | REMARKS |
| # 14 – 14 | 7/8” | # 14 – 6.3 mm Major Diameter |
| # 12 – 12 | 1” | # 12 – 5.6 mm Major Diameter |
EDPM Bonded Steel Washer
O.D: – 11, 12, 14, 16 and 18 mm
I.D: – 4.8, 5.5, 9, 10, 11, 12 and 14 mm
Thickness: – 2, 2.7 and 3 mm
WOOD SCREW (C 1018)
Bugle head, Philips
Coarse thread
Shard point
Case hardened
Black and phosphated
Diameter: 3.5 to 5.2 mm, # 6 to # 14 Length: 19 to 150 mm
ROOFING NAILS WITH UMBRELLA HEAD WITH OR WITHOUT TWISTED SHANK ELECTRO GALVANIZED or MECHANICAL GALVANIZED
| 9G X 2-1/2″ | (9G = 2.906 mm) |
| 10G X 2-1/2″ | (10G = 2.588 mm) |
COMMON ROUND IRON NAILS NATURAL FINISH
| BWG 12 X 2” | (BWG 12 = 2.02 mm) |
| BWG 11 X 2 ½” | (BWG 11 = 2.304 mm) |
| BWG 10 X 3” | (BWG 10 = 2.588 mm) |
| BWG 9 X 2 ½” | (BWG 9 = 2.906 mm) |
| BWG 8 X 4” | (BWG 8 = 3.364 mm) |
| 5.3 MM X 5” | |
| 6.1 MM X 6” | |
| 6.1 MM X 7” | |
| 6.5 MM X 8” |
Stainless Steel fasteners for General and special applications
